AUTEMPLC-ANALYZER pro 6 PLC-ANALYZER Pro 6, is a software system for logic analysis and recording of measured values in PLC-controlled facilities. Acquisition, representation and evaluation of PLC signals such as input, output, flags, timer, counter, data of data blocks, is now very easy. In addition, video data can also be recorded synchronously with the PLC process data (Videotrack module). .. Overview PLC-ANALYZER pro 6 has the decisive advantage of recording process data via standardized PLC interfaces. For example, for SIMATIC S7 signals can be acquired using TCP/IP PROFINET or MPI/PPI, PROFIBUS. All CODESYS communication paths, OPC-UA and many other PLC connections of various manufacturers are supported. A programming device or notebook, that is connected for the purpose of programming the PLC, can be used for recoding process data without modification. By means of high-performance PLC drivers (in-house development) the PLC-ANALYZER pro 6 achieves sampling rates, which would not be possible with a OPC-UA-based solution. PLC-ANALYZER pro 6 simplifies the signal selection by using symbol files or projects of the PLC programming software. Loading e.g. a TIA / STEP7 project makes all settings and variables immediately available. Symbols can also be imported directly from the TIA PLC. . PLC-ANALYZER Pro 6 module helps to clarify plant accidents involving human operators. The subsequent HMI visualization from recorded process data makes it easier to detect possible operating errors. The HMI visualization can also take place live during the recording Fields of application Failure diagnosis Detecting and localizing of sporadic errors Cycle time optimization Long-term recording of measured values System documentation, TPM/OEE, EU-Machinery directive Condition monitoring | Predictive maintenance Warranty: incorruptible clarification Quality assurance Installation, development, maintenance More...